Sent | Crimp Info – information & advice on crimping issues

Advice on:
Connector Tool Kits e-mail us to request data sheet

If you have an enquiry please provide your name, e-mail address and details in the boxes below.Thank you for checking out “our” website! Click

NEWS

1 Crimpinfo (PKG Consultants LLP) has formed a co-operation with High Quality

tool manufacturer RENNSTEIG Tools GmbH.We will provide technical and marketing support in the UK to their distribution network and end users.

2 Souriau introduce selective plating process on the UTS series pre-formed loose piece stamped and formed contacts. This is denoted by plating code S31 ,and by applying gold plating only in

3 Wire stripping dimensions are becoming increasingly more accurate. Crimpinfo has reviewed several connector manufacturers recommendations to reveal typical insulator stripping dimensions of 6,5mm-7,5mm . In some instances no +/- is given, typically 6’35mm and 5,8mm. Crimpinfo is developing an accessory that will be attached to standard industry wire strippers to allow operatives to achieve an accurate and repeatable stripping dimension. specific areas results in lower piece part costs.

3 An interesting editorial guide is available on the Interconnection World / Connector Specifier website , it is sponsored by Schleuniger Inc and covers the topic of Crimp Quality “Best Practices ” registration is required .

EVENTS 2014

Crimpinfo will be attending the following events during 1st quarter 2014…

Southern Manufacturing Show 12th -13th February FIVE Farnborough.

Oceanology International 11th – 13th March EXCEL London.

Aero in Friedrichshafen 9th -12th April Messe Friedrichshafen GmbH.

Further events TBA

Parts sourcing service

Once we have determined your specific tooling requirements, (Crimpinfo will not charge you for this service.) We will then offer the most cost effective and expediently available products to satisfy, or exceed your requirements.

We will work with you on a step by step basis to ensure your choices are fully informed and supported.

Part No. Cross referencing service

Many companies and organisations assign their own part numbers to: crimping tools, turret heads, positioners, die sets, insertion tools and removal tools.

Our wealth of knowledge is able to assist in cross referencing the assigned part number back to the original equipment manufacturers part number.

Links

Our senior partner has long associations with several companies whose products and services compliment those being offered by Crimpinfo . The companies below have agreed to partner us to extend our products, services and shared expertise.

AV Optics Ltd

Comprehensive details available at: www.avoptics.com

Provide innovative solutions to cover every facet of fibre optic repair , re- termination, test and inspection, independently of power supplies or production facilities. The AV Optics state of the art curing process significantly reduces epoxy curing times. There should be a termination system to support your fibre optic connector type, e-mail Crimpinfo with the details and we will be able to confirm this for you.

Record Dimensions Ltd

Comprehensive details available at www.rdco.co.uk

Provide tool protection systems in hard case format or padded bags, in either option a signal foam insert provides an alert to a missing tool. The CNC routed foam to the contour of the tool provides the ultimate in tool protection. Complete electrical connector system tool kits are available, e-mail Crimpinfo with the connectors you wish to support and we will advise you accordingly.

Example foam layout:

Location

PKG Consultants LLP

Northgate Business Centre

38-40 North Gate
Newark-on-Trent,

Nottinghamshire NG24 1EZ

The nearest mainline railway station is Newark Northgate, which is located 0.4 miles away, approximately 8 minutes on foot.

Contact
paul@crimpinfo.co.uk
Office:
+44(0)1623 820 963
Mobile:
+44(0)7969 111 558

HAVE AN ENQUIRY?

Thank you, we will be in touch shortly.

Return to website